Connect from LabIR RTSP Player

First, enable streaming on the IR camera

Before opening the LabIR RTSP Player application (download), enable streaming on the thermal camera according to the instructions here.

After enabling streaming, the thermal camera provides two streams (stream comparison). You can connect to both using the LabIR RTSP Player application:

  • rtsp://IPv4:5540/live.sdp = display image
  • rtsp://IPv4:5540/thermal.sdp = temperature data (works only with IR camera firmware version 2024-09-04 or higher)

2. Then, enter the IP address of the thermal camera in LabIR RTSP Player

In the LabIR RTSP Player menu, select File > Open Camera Stream, and you will see this dialog:

Select a device and, a desired stream and hit OK.